Comments on: How to Install VPN using RRAS (Remote and Routing Access)

By: Jason-Pat

Jason-Pat — Sat, 27 Feb 2021 12:08:20 +0000

Yes, you can certainly connect more than 2 clients at a time.

By: Pierpaolo Basile

Pierpaolo Basile — Mon, 15 Feb 2021 10:10:28 +0000

Hello, does this method circumvent the limit of 2 RDS users? will it be possible to connect multiple clients at the same time? Thanks so much!

By: internetprices

internetprices — Wed, 25 Nov 2020 09:07:16 +0000

I have set up that VPN but my VPN client is only able to ping the private IP of the VPN server. Not able to ping/access any of the other servers in the remote LAN, I mean VPN client is not able to access all other servers / PC in VPN server’s LAN.

By: Jason-Pat

Jason-Pat — Mon, 21 Sep 2020 11:50:50 +0000

In reply to Hamed.

Looks like routing issue. You will need to make sure that
1) You have selected “Virtual Private Network (VPN) access and NAT” while configuring Routing and Remote access
2) You should recheck your NAT settings.

By: Hamed

Hamed — Sun, 13 Sep 2020 15:31:26 +0000

Hello
First of all, forgive me for my bad English
I need Create a VPN server for change the IP address
As you know, in some countries, such as Iran,many sites have filtering problems (Sites are blocks)
I have a server in Germany. Can I create a VPN with this server to change the IP?

I was able to create a VPN server on a German server, but when User Connecting With the VPN the Internet is gon

I am very grateful for your help in this case

By: Jason-Pat

Jason-Pat — Fri, 28 Aug 2020 07:58:32 +0000

In reply to Mic.

It is not necessary to have 2 NICs. It is obvious that if you are renting server/virtual server with remote access, it will have only one NIC attached to your machine. In that you can use loop back network adapter. Just search for how to install loop back network adapter on the server. You will see lots of guide on it. Once you are done, you can use it in place of your second NIC.

By: Jason-Pat

Jason-Pat — Fri, 28 Aug 2020 07:55:10 +0000

In reply to Maximiliano Ramos.

1) You will need to make sure that Network Access Permission is Enabled for the server in which you have configured VPN.
2) If your server has firewall installed, please make sure that the port 1723 is accepting inbound connection. You may check this from your client machine. CMD: telnet 1723

By: Maximiliano Ramos

Maximiliano Ramos — Thu, 27 Aug 2020 02:15:38 +0000

Hello. I followed this guide to create a VPN network from my clients to our server, but despite all the configurations have been properly completed, the clients are not able to connect nor by SSTP SSL or PPTP. They will not reach out the server public ip address.
Is it possible to get some assistance to get this working?

Thanks in advance.

By: Mic

Mic — Mon, 20 Jul 2020 12:36:19 +0000

Is necessary to have 2 NIC on server? We have only 1 NIC. Is it possible to set with 1 NIC?

By: SANTOSH PATNAIK

SANTOSH PATNAIK — Wed, 01 Jan 2020 08:34:27 +0000

Rahul..
I have a doubt that how can i connect local LAN server to cloud server??
can a local LAN client access without changing the local IP address?